• Total Environmental Monitoring Solutions...since 1990.

Our Product Range



  • Instrumex
    No. 106, Ashish Udyog Bhavan, Opposite S. N. D. T. College, Liberty Garden Road, Malad West Mumbai - 400064, Maharashtra, India

  • +(91) - 9322873609
    +(91) - 9322235281

  • instrumex@gmail.com

Continuous Emission Monitoring System (CEMS)

Model No :

Gas Sample in flue gases passes through the probe, primary filtration, sampling ball valve and secondary filtration in the chassis, then reaches to measuring cell. After analysis the density and humidity of all components the sample gas will be drained through sampling pump.

By controlling sampling ball valve and back-blowing solenoid valve, the system can regularly back –blow to the probe. It can also realize the regular calibration of the analyzer by controlling and calibration solenoid valve.

Key Features

• Measure lower limit of ultraviolet flue gas analyzer is as low as 1 mg/m3.
• The system structure is compact with high integration, easy to transport & install.
• Simple structure, without moving parts, long period free from maintenance, high resistance to vibration.
• The latest laser Backward/forward scattering dust monitor is suitable for high humidity flue gases, light leaking stack and low dust emission and other application points.
• Integration of low flow velocity of temperature pressure flow.
• Completely independent research and development of the core module and algorithm.

Technical Specifications

Heating Temperature 1200C -1800C
Operating Temperature 200C – 500C
Operating Humidity  0-95% RH (Non- condensing)
Power Supply  220V AC, 5000W
External Output  10 x 4 -20mA, 1 x RS232, 1 x RS485
Compressed Air Requirement  (0.4-0.8)mPa/115psi  0.25m3/min
Dimension 800mm x 600mm x 1800mm
(Configuration dependent )